When it comes to transporting your bike or getting it serviced, you would need a good motorcycle chock in place to secure it firmly. And while there are various chocks out there, the top ones have been listed below for easy reference.
1. Extreme Max 5001.5010 Standard Motorcycle Wheel Chock
The Extreme Max 5001.5010 Standard Motorcycle Wheel Chock is the one you need when you are looking to transport your bike and need a strong mount to secure it into place.
Made with black matte finish, this particular chock, priced reasonably around $50, is both durable and strong enough to cradle your bike securely.
What’s more, it is designed well, using less space to provide the essential support for the bike.Check price here.
You should be able to guide your bike onto the chock, secure the front wheel into place, adjust the height for the rear mounts, and you should be set.
This particular chock can be used for both the standard and other bikes, and should fit wheels measuring 17 to 21 inches. And while you can count on your bike remaining upright without tipping over, the fact that this particular chock uses less space makes it a good one. With a solid cross front bar and a solid boot, you can rest easy knowing that your bike will remain upright, held securely by the chock on the trailer bed while transporting it across the country. The space saving design should sure come handy when transporting more than one bike. Moreover, with the Extreme max motorcycle chock, you can easily adjust the rear wheel to fit the wheel perfectly and secure your bike into place.Check price here.
2. MaxxHaul 70075 Motorcycle Wheel Chock
The MaxxHaul 70075 Motorcycle Wheel Chock is sleek, sturdy, made of a durable design, and can be used easily on most bikes.
So if you were looking for a way to secure your bike to the trailer bed for transportation, then this one should fit the bill to a T.
Priced just under $40, the chock is easily affordable and can be assembled in minutes by anyone.Check price here.
Made of heavy duty steel, which can weather extreme stress and pressure, and with a metal matte coat finish, the product can help secure your bike easily and ensure that it does not tip over. It can be mounted securely onto a floor, trailer bed, or truck, and is quite handy when transporting multiple bikes.
On the con side, the chock still needs to be securely mounted onto the surface and your bike can still swing sideways, which may eventually cause your bike to tip over. However, it does provide a less expensive alternative for transporting bikes. However for transporting across large distances, it is always better to use additional support for propping up the bike. The chock is great for holding the bike firmly and better yet, you should be able to just ride your bike in and strap it into place in one easy go. With adjustable swivels, you should be able to firmly secure your bike with no hassle. This chock fits most bikes easily but you can always check online whether it would fit your bike by researching online.Check price here.
3. MaxxHaul 70271 Heavy Duty Motorcycle Wheel Chock
The MaxxHaul 70271 Heavy Duty Motorcycle Wheel Chock is just the sort of motorcycle chock you would need for the big bikes.
If you happen to own one and are desperately looking for a way to secure your bike to the floor or the trailer bed, then this is the chock you would need.
Rather than worry about whether the boot in this chock would fit the wheel of your bike or not, you can go instead for this heavy duty chock, as it will fit the wheels of most bikes out there, from the standard to the Harleys.Check price here.
This motorcycle chock has a capacity of 1800 pounds, and is made from heavy weight steel with a metal matte finish. It is both durable and strong, and should be able to help transport your bike with no issues. Priced around $85, this chock would be just perfect as it comes to securing your big bike to the floor. On the other hand, this chock is priced a bit steeper than others and unless you are transporting big bikes, you can go in for other chocks which are priced more reasonably.
Also this chock uses flathead screw, which can damage your bike and the wheel. It comes with a fully adjustable wheel locking system in place, thereby giving you more security. The boot should easily be able to accommodate bikes with wheels measuring 17 to 22 inches. Overall, this chock is worth purchasing, especially since you can mount it to any surface and use it to secure your bike firmly; and the fact that it has a secure locking system in place is another plus. Once you have it bolted down, you should be able to use the chock easily and mount your bike onto it in one easy move.Check price here.
4. Dragway Tools 1500 lb Fixed Motorcycle Front Wheel Chock Fits Sport Bikes & Road Cruisers
You should be able to use the Dragways chock easily and get your bike mounted securely without any hassle.
And if you are worried about whether the chock can take the weight of your bike, well, this one can upwards of 1,500 pounds.
And this chock should fit most bikes, including road cruisers, and the mount should fit most wheels between 17 and 21 inches.Check price here.
Priced just under $70, this chock is made from high grade steel alloy and comes with nonslip rubber feet. Overall, this chock provides you with a reliable way to strap your bike down without any hassle. The upper shoe comes with two adjustable holes which you can use to adjust the mount to fit your bike. And while this chock is priced a bit high, it still provides you with a way to secure that bike firmly to the trailer bed. Before purchasing the product, make sure that the boot fits the wheel of your bike and comes with a secure locking system.
In fact, with this chock you should be able to load and lock the bike into place all on your own. Moreover, the large setting on the mount will enable you to push the front wheel of your bike deeper, thereby enabling you to lock it down even more securely. And it also comes with a safety latch to prevent the bike from backing out or tiling during transportation and prevents your bike from being damaged. And since this chock optimizes the use of space, with its neat and sleek design, you should be able to mount it onto any surface.Check price here.
5. Goplus Heavy Duty Motorcycle Wheel Chock Adjustable Upright 1800lb Capacity
The Goplus wheel chock is perfect for motorcycle loading, so if you were looking for ways to transport your heavy vehicle, then this chock would definitely come in handy.
With a capacity of 1800lb, this wheel chock is a heavy duty one and should enable you to mount any type of motorcycle as long as its wheels fit.
The chock is designed to hold vehicles with wheels 15 to 22 inches in diameter.Check price here.
Priced around $65, the wheel chock is made from strong durable steel with a metal finish and provides you with a long standing and durable mount. It comes with an adjustable wheel lock that should fit either the front or rear wheels easily. While this chock can help you secure your bike firmly and keep it from tipping over during transportation, it still needs to be bolted down to secure the bike firmly. This mount should be of great help if you are looking to service your bike, clean it up, or secure it for transportation over long distances.
And while you can mount your bike and strap it down even if the chock is not secured to the floor, it is still a good idea to secure the chock to the floor. The chock can be easily set up and operated by anyone, and moreover, it can be used for a variety of purpose. You should be able to load your bike with this heavy duty chock within seconds and without any difficulty.Check price here.
6. Condor SC-2000 Trailer-Only Chock
The Condor SC is a trailer only chock, so if you were looking for ways to secure your bike or multiple bikes onto the trailer bed, then this chock should do the trick.
One of the neat things about this particular chock is the ease of use, whether you are anchoring it to the trailer bed or removing it after use.
Priced under $145, the Condor Trailer only wheel chock is made from strong and durable steel alloy, and is made to secure most bikes with wheels ranging from 14 to 22 inches in diameter.Check price here.
Apart from that, the chock is quite easy to set up, and you should be able to anchor it to the trailer bed without any issue.
Moreover it comes with a fully adjustable front wheel locking system, thereby offering you more security and stability while you transport your bike. It has a patented locking system, and unlike others, where bikes can tilt to the side, this one ensures that yours stays upright for the duration of the whole trip. It optimizes use of space and enables you to tie down your bike with two straps in an upright position without using much space. It can also be folded up and stored easily. This wheel chock will cradle your bike without causing damage to your bike’s suspension parts. On the downside, the price is indeed steep, but given the features it is definitely worth it, especially as it ensures that your bike stays upright.Check price here.
7. Pit Posse Motorcycle Wheel Chock Nest Adjustable Self Locking Bike Stand Removable
The Pit Posse Motorcycle Wheel Chock is one of those few wheel chocks that makes it easy to use on multiple surfaces including trailer beds, homes, and even parking garages.
While you can use this wheel chock to secure your bike firmly and use the pivoting bracket to strap your bike onto, it is the fact that this chock comes with an easy release function that makes it stand out.
Priced under $50, the wheel chock is made with steel alloy and comes with a zinc plated cradle for cupping that front wheel.Check price here.
It allows for easy loading where you can just drive it onto the mount and the bike will lock it in securely with the pivoting bracket. But on the downside, even though the product comes with one of those easy release options, the fact that the bike can get easily released is also one of the reasons why this chock can end up damaging your bike. While the release function makes it possible for you to easily remove the bike, and even to reload it onto the mount easily, the fact remains that this chock only manages to hold your bike firmly, but it can sway from side to side when transporting it. With heavy gauge steel and ease of use, this wheel chock is definitely worth it.Check price here.
8. Venom Motorcycle Bike Front Tire Wheel Chock Lift Stand For Harley Davidson Ultra Tour Glide Classic
The Venom front wheel chock is perfect for storing, transporting, or even for just securing your bike while hosing it down.
The neat thing about this particular chock is that it secures most bike makes easily, as the mount can cradle front wheels with diameters ranging from 17 to 21 inches in diameter.
Made from heavy duty steel, the wheel chock should last you for a long time and is designed in such a way so that you can secure your bike onto any surface with little or no difficulty.Check price here.
It is black in color and is made from high grade steel with three adjustable positions with which you can fix your bike firmly. It also comes with rubber caps so as to prevent any scratches on your machine.
Priced under $60, the wheel chock also comes with an easy release function where a mere pull back on the wheel will get the chock to automatically release the wheel. While this provides you with an easy way to get your bike released from the chock, it can also be a problem when transporting, as the swaying of the trailer bed from side to side can result in a premature release. So when transporting your bike over long distances, make sure that it is secured onto the mount and the trailer bed, and use additional support to prevent any premature releases. It can be easily assembled and installed in minutes. This wheel chock is definitely a good buy, especially given the benefits of using this wheel chock.Check price here.
9. MJ Motor Gear Wheel Chock
MJ’s wheel chock enables you to lock down your bike securely and, moreover, comes with a secure locking mechanism, thereby providing you with more security and stability.
This wheel chock is perfect for all sports bikes and should fit most, and can secure bikes with wheel diameters ranging from 16 to 17 inches.
Priced under $85, the wheel chock does enable you to secure the mount securely to trailer beds, concrete, and trucks.Check price here.
While the rate may seem a bit on the steep side, given the wide array of plus points, this chock is definitely worth it. It is very easy to assemble and set up, and all that you would need to do is to ride the bike onto the mount and the cradle auto locks the wheel into place. So you would not be required to strap anything in.
Moreover, this wheel chock comes with holes in bases for mounting and also with a one year warranty. However, before purchasing the product, you may want to check out the terms of the warranty. One person can operate this mount easily, so you should be able to start using this wheel chock. It also comes with an easy release function as well. The great part is that you can get the mount set up in one go, and get your bike secured firmly thanks to the dynamic self-adjusting pivot jaw.Check price here.
10. Venom Universal Motorcycle Wheel Tire Chock Self-locking Bike Stand
The venom universal motorcycle wheel can be used for most bikes as long as the diameters of the wheels range between 17 and 21 inches.
If you were looking for ways to ensure that your bike stays upright during transportation, then you would definitely need a good wheel chock to make that happen.
This wheel chock, priced under $75, is made from superior grade steel and provides you with an easy way to secure your bike.Check price here.
You can remove your bike from the mount by pulling back, which should get your wheel auto released. It comes in black color only and comes with a easy release function which can often lead your bike to being prematurely released when transporting over long distances. The product does not have a secure locking system in place. Despite this, this wheel chock is a worthwhile purchase and with it, you should be able to secure your bike firmly to the mount.
So whether you are planning to transport multiple bikes or just need a way to secure your bike when cleaning it out, you would need a wheel chock to secure your front tire. When it comes to choosing wheel chocks, do review your requirements and check out the various mounts and see if they are a match. The price range would vary as well with some of these mounts being very easy to set up. Just remember to check the product out and see if they are a good sort. Most chocks are made from steel, so you can rest easy knowing that these chocks are designed to support large weight, and are extremely durable. With wheel chocks in place, you can use secondary supports like U bolt to secure your bike and prevent it from swaying or tipping over.Check price here.